Someone has made your fake account….Don’t Worry…..Tracing facebook user..
---------------------------------------------------------------------------
First you got to find out the IP address of that User.
To Do so we will be using “netstat”
command in windows. If you want to know the IP address of a specific person on facebook or orkut or any chat service, there is only one way: Just invite or ping him for a chat and while chat is ON open ‘Command Prompt‘ on your PC (Start >Run>cmd).
note: before trying this make sure you close all the other tabs in your browser. and only facebook is open. also if possible delete all the history and cache from your browser.
When command prompt opens Type the following command and hit Enter.
netstat -an
And you will get all established connections IP addresses there. Note down all the suspicious IP’s.

The Next Step is to Trace that user using his IP address.
To do so we will be using IP tracer service. Go to the below address and paste the IP address in the box that says “lookup this ip or website”. and it will show you the location of the user.
http://www.ip-adress.com/ip_tracer/
It will show you all the information about that user along with his ISP and a Location in the MAP. Now in the MAP Just click on “click for big ip address location” in the big picture you can actually zoom in. and try to recognize the area. If any serious matter just note down the ISP details in that page and contact them about the IP. they will respond you.
Other netstat commands:
-a Displays all connections and listening ports.
-e Displays Ethernet statistics. This may be combined with the -s option.
-n Displays addresses and port numbers in numerical form.
-p proto Shows connections for the protocol specified by proto; proto may be TCP or UDP.
-s option to display per-protocol statistics, proto may be TCP, UDP, or IP.
-r Displays the routing table.
-s Displays per-protocol statistics. By default, statistics are shown for TCP, UDP and IP; the
-p option may be used to specify a subset of the default.

Crash Small Websites with rDos

Crash Small Websites with rDos

Port Scanner   -------- download it 
rDos ------- download it


Step One: First we need to find the websites IP Adress. This is too easy ... there are many methods to get website IP.. hope you know... if you dont know then comment below

Ok so say they URL is http://www.yoursite.com ok now that you have your URL open Up Cmd todo this press Start>Run>cmd Once you have CMD open you type pinghttp://www.yoursite.com press enter and you will get the ip of the website. (YOU MUST REMOVE HTTP:// AND ANY /'s).

EXAMPLE:

Step Two: Now we must test to see if port 80 is open (it usually is).


This is very easy todo to Ok open up the port scanner you downloaded.
Once in the port scanner type in your Victims ip that you got from step 1.
It will ask you to do a range scan or a full scan (SELECT REANGE SCAN!) It will ask for conformaition you have to use a capital Y or a capital N! Now enter 79 for lowest port and 81 for highest hit enter than hit cap Y. 

[X] = Closed
[X] Vulnerable = Open

Step Three:
The final and easiest step (IF PORT 80 IS CLOSED PICK A NEW SITE!)
If port 80 is open your on your way to crashing!!

Ok open Up rDos that you download.
Enter the ip that we got from step 1.
It will ask you for the port to attack use port 80 that is why we scaned to make sure 80 was open! If it is closed it will not work.
Hit enter.. *= Flooding -=Crashed Or didn't connect!

EXAMPLE:




The site won't be directly offline!!
it starts with ***********
be patiend.. after some time it will go like this: **********-----------

This means the site crashed.

Social Engineering: The Art of Hacking Human Mind

Social Engineering: The Art of Hacking Human Mind

Written by : Christopher Hadnagy

 

The first book to reveal and dissect the technical aspect of many social engineering maneuvers

From elicitation, pretexting, influence and manipulation, all aspects of social engineering are picked apart, discussed and explained by using real world examples, personal experience and the science behind them to unraveled the mystery in social engineering.



Kevin Mitnick, one of the most famous social engineers in the world, popularized the term "social engineering". He explained that it is much easier to trick someone into revealing a password for a system than to exert the effort of hacking into the system. Mitnick claims that this social engineering tactic was the single-most effective method in his arsenal. This indispensable book examines a variety of maneuvers that are aimed at deceiving unsuspecting victims, while it also addresses ways to prevent social engineering threats. 

• Examines social engineering, the science of influencing a target to perform a desired task or divulge information.
• Arms you with invaluable information about the many methods of trickery that hackers use in order to gather information with the intent of executing identity theft, fraud, or gaining computer system access.
• Reveals vital steps for preventing social engineering threats. 

Download 

Hide a Drive With the help of CMD

Hide a Drive With the help of CMD

In this post i'm going to tell you to how to hide a particular hide drive with 'CMD'
So let's get started.
Follow these simple steps to hide a drive :

Step 1 : Open CMD

Step 2 : Now in CMD, type diskpart and hit enter.

  

Step 3 : Now your Drives will be listed there.

Step 4 : Select the drive you want to hide. I'm going to hide my E drive , it's volume no. is 3..
             To select it i'm going to write---- select volume 3

Step 5 : Now type remove letter E and hit enter.
             Drive is removed from explorer !!

To reassign letter follow Step 1 to 3.
Then select the volume you want to be appeared in explorer.
After selecting the volume write assign letter E and hit Enter.

The drive will again appear in explorer.

Have FUN !!

Hide a Drive With the help of CMD

Hide a Drive With the help of CMD

Posted by Satinder Khehra at 6:41 AM

In this post i'm going to tell you to how to hide a particular hide drive with 'CMD'
So let's get started.
Follow these simple steps to hide a drive :

Step 1 : Open CMD

Step 2 : Now in CMD, type diskpart and hit enter.

  

Step 3 : Now your Drives will be listed there.

Step 4 : Select the drive you want to hide. I'm going to hide my E drive , it's volume no. is 3..
             To select it i'm going to write---- select volume 3

Step 5 : Now type remove letter E and hit enter.
             Drive is removed from explorer !!

To reassign letter follow Step 1 to 3.
Then select the volume you want to be appeared in explorer.
After selecting the volume write assign letter E and hit Enter.

The drive will again appear in explorer.

Have FUN !!